How to use Input Alarm contacts ?
Valid for those references :
GGM KITIP24C5MP
GGM KITIP24CD5MP
GGM KITIP48C5MP
GGM KITIP48CD5MP
GGM KITIP48C4MPA
GGM KITIP48CD4MPA
GGM KITIP48CDM5MP
GGM KITIP816C5MP
GGM KITIP816CDM5MP
GGM NVRL0104
GGM NVRL0104P
GGM NVRL0108P
GGM NVR0108PA
GGM NVR0208P
GGM NVR020808P
GGM NVR0216P
GGM NVR021608P
GGM NVR021616P
GGM NVR0232
GGM NVR023216P
GGM NVR0416
GGM NVR0432
GGM NVR043216P
GGM NVR0816
GGM NVR081616P
GGM NVR083216P
GGM NVR0832
GGM NVR16
GGM NVR32
GGM NVRE0104P
GGM NVRE0108P
You can use Input Alarm (Passive Alarm) from the rear Panel and create the scenarios you want.
Example 1: You want to use Input 1 Alarm and trigger recording Channel 1 only when alarm is normally close
Example 2: You want to activate a siren with the output Alarm of the recorder as soon as motion detection is active on a camera.
Power Limit MAX DC12V 300mA
Go to Main Menu, then SETUP then Alarm and IO
- Choose the Channel you want (IO-1 means Input Alarm 1, IO-2 means Input Alarm 2…)
- Choose IO Status : Normally Open or Normally Close
- Latch Time : Choose the activation time of the Input contact
- Actions: You can decide to activate one or more actions such as Alarm Output, recording Channels, Full Screen or send Email…
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article