How to use Input Alarm contacts ?
Valid for those references :
- GGM KITIP24C5MP
- GGM KITIP48C5MP
- GGM NVRL0104
- GGM NVRL0104P
- GGM NVRL0108P
- GGM NVR0208P
- GGM NVR0216P
- GGM NVR02168P
- GGM NVR8
- GGM NVR16
- GGM NVR32
- GGM NVRE0104P
- GGM NVRE0108P
You can use Input Alarm (Passive Alarm) from the rear Panel and create the scenarios you want.
Example 1: You want to use Input 1 Alarm and trigger recording Channel 1 only when alarm is normally close
Example 2: You want to activate a siren with the output Alarm of the recorder as soon as motion detection is active on a camera.
Power Limit MAX DC12V 300mA
Go to Main Menu, then SETUP then Alarm and IO
- Choose the Channel you want (IO-1 means Input Alarm 1, IO-2 means Input Alarm 2…)
- Choose IO Status : Normally Open or Normally Close
- Latch Time : Choose the activation time of the Input contact
- Actions: You can decide to activate one or more actions such as Alarm Output, recording Channels, Full Screen or send Email…
Este artigo foi útil?
Isso é ótimo!
Obrigado pelo seu feedback
Lamentamos por não termos podido ajudá-lo(a)
Obrigado pelo seu feedback
Comentário enviado
Agradecemos o seu esforço e iremos tentar corrigir o artigo