WiFi Access Point [LAN] - AP Mode Setup (Access Point) - LAN Method

Valid for those references : 

- GGM WAPC1

-  GGM WAPCD2

- GGM WAPCD3

- GGM WAPEXT24

- GGM WAPEXTD

- GGM WAPEXT1800
- GGM WAPAX1800
- GGM WAPAX3600

1- Network Topology / Hardware Overview

Hardware Overview :

DC: Power Supply used for 12v/1A (optional)
WAN/Poe: Used to connect to the power and Internet
LAN : Linked to the LAN
Reset: Press the reset button about 15 seconds, then release to reset

2- Software Installation

Connect your PC with the LAN Port then login Web Management with Internet Explorer or Google
Chrome:

You must configure your PC with a fixed IP address 192.168.188.XX (X between 2 and 252)

IP Address by default (LAN): http://192.168.188.253
Password : admin

3- Configuration

You can use Wizard to choose the mode you want to configure:

a) AP Mode

Configure the wireless parameters, such as:

SSID : Wifi Name
Encryption: Authentication Mode
Key: Security Key you want to use

b) Repeater Mode

If you want to have a longer range for wifi, please use this mode. First, you have to link your Repeater
to your Initial Access Point (for example Box)

Repeater SSID: Wifi Name
Scan AP: to scan and link it to your initial Access Point

c) Gateway Mode

Please input your information such as:

d) WISP Mode

If you have wireless Internet service provider, Use Scan IP, refer to the Gateway Mode for
configuration

Download the Firmware - GGM WAPCD3

-