UNIVIEW - How to use RTSP stream from a camera

Ändrad den Mån, 13 mar., 2023 vid 3:55 E.M.



How to use RTSP stream from a camera


 From NVR 

To be able to access the setting you must be selected a camera and then click on modifiy or click on add if your camera is not already on your recorder

 

Once in the setting if you click on add please make sure that the add mode is set  to ip address and that the protocol is of course custom, then in custom you set custom1 then clicked on the protocol button.

 

 

In this window you will set the port to 554 then you will have to adjust the ressource path to be able to access your camera, for exemple if your camera has the address 172.168.2.50 your rtsp address will be rtsp://172.168.2.50:554/ , then save

 

 

 

 

In order to verify that your rtsp connection is working well, you can use the status of the cameras. If the logo is green it is that the camera or cameras work otherwise it will be displayed gray. 

 

 

In additional : 

 

IPC:
 
rtsp://IP address:554/media/video1 mainstream
 rtsp:// IP address:554/media/video2 substream


 
NVR:
 
rtsp:// IP address:554/unicast/c1/s0/live mainstreamc1 means channel 1s0 means mainstream 
 rtsp:// IP address:554/unicast/c1/s1/live substream 
channel1

 
With password
 
NVRrtsp://admin:123456@192.168.1.30:554/unicast/c1/s0/live
 IPC
rtsp://admin:123456@192.168.0.13:554/media/video1

Username: admin

Password: 123456


Var artikeln till hjälp?

Toppen!

Tack för din feedback

Vi beklagar att det inte var till hjälp

Tack för din feedback

Berätta för oss hur vi kan förbättra den här artikeln!

Välj minst en av orsakerna
CAPTCHA-verifiering krävs.

Feddback skickat

Vi uppskattar din feedback och uppdaterar artikeln vid behov