How to integrate a UNIVIEW camera on a GIGAMEDIA recorder (ONVIF Protocol)

How to integrate a UNIVIEW camera on a GIGAMEDIA recorder 

(ONVIF Protocol)

Before start   :

There are different ONVIF Profiles used to retrieve video stream but also for controlling PTZ cameras, using Input/Output alarms, triggering motion detection,…

• You need to add manually you camera
• Make sure that the profile of he camera to integrate is compatible with your recorder
• Also make sure that your camera’s video settings are compatible with your recorder (Maximum resolution, Codec, bandwidth used, …)
  
  Before starting to add your camera, make sure you know IP address, user/password of your camera and respect the IP range of the other cameras

For this example, we are going to add a UNIVIEW camera into a GIGAMEDIA Recorder.

By default, ID/password for UNIVIEW camera is admin/123456

If you don’t know IP address of your camera, please download utility from UNIVIEW named EZTools. 

Here, IP address of the camera is 10.36.0.16 and ID/password : admin/123456 

To start, Go to the Web Interface of you GIGAMEDIA recorder by typing its IP address in the search bat and typing in the identifiers. 

Then Go to « Remote Settings » / Channel / IP Channels

Then, you must switch to Manuel Mode by Clicking on « Edit » 

Now Switch to Manuel Mode. 

Then, Press the « + » to add the camera

Now, enter Login information and don’t forget to put “ONVIF” for Protocol.

Your camera is now well added !