Valid for those refrences :
- GGM KITIP24C5MP
- GGM KITIP48C5MP
- GGM NVRL0104
- GGM NVRL0104P
- GGM NVRL0108P
ePoE function allows to extender distance (2x 90 meters) of your RJ45 connection between your camera and the recorder
Go to Main Menu -> Configuration / Channel then CIP Channels and Edit the camera you want (CA1, CA2
, CA3,...)
Graphical User Interface (GUI) :
WEB Interface :
Auto Mode : (by default) - The maximum bandwidth is limited to 100 Mbps.
EPOE Mode : the maximum bandwidth is limited to 10 Mbps and POE transmission distance will be extended up to 200 meters with RJ45 cable, according type of cable used *
Warning : If you have a connection problem with Auto mode when the IP camera is powered by PoE via a RJ45 cable longer than 100 meters, then change to ePOE mode for a stable connection. If the video is stuck while in ePoE mode, try to reduce the encoding bitrate.
* GIGAMEDIA recommands a CAT6 cord, rigid and shielded.
Questo articolo ti è stato utile?
Fantastico!
Grazie per il tuo feedback
Siamo spiacenti di non poterti essere di aiuto
Grazie per il tuo feedback
Feedback inviato
Apprezziamo il tuo sforzo e cercheremo di correggere l’articolo